Electrak E150
110, 225, and 450 lb. load capacities
Features:
Low cost
Quiet operation
Optional adjustable limit
switches
IP-56 rated for outdoor
use
Durable, lightweight, plastic
housing
Available DC voltages:
12 or 24
Available AC voltages:
115*
Estimated life at rated
load is 40,000 cycles minimum
The Electrak 150 is the first of a new
series of low priced, quiet actuators with different load and speed ranges.
The optional limit switches are designed to operate with fewer parts. The plastic cover is designed to by recyclable. The actuator has a breather tube in the wiring harness to allow the actuator to operate without drawing through the seals on the cover tube. The colors are molded into the plastic to both eliminate the need for paint and touchup of scratches. The extension tube is stainless steel and the front and rear adapters are zinc die castings for corrossion resistance. All of the thrust is resolved through the screw with the protection but carrying no load. The entire actuator has been created for ease of installation, quiet operation, no maintenance, light weight, and low cost.
Typical applications
Automatic
security gate positioning Raise/lower the deck
on ridingmowers
Position ladder, vents,
dischargechutes on combines
Tilt/recline on powered
wheelchairs Position ergonomic
tables, chairs Postion jigs in flexible
assemblyoperations
| Specifications | |||
| DF12-10W51-XXX | DF12-10W52-XXX | DF12-10W54-XXX | |
| Dynamic Load | 450 lbs. max. | 225 lbs. max. | 110 lbs. max. |
| Static Load | 900 lbs. max. | 400 lbs. max. | 330 lbs. max. |
| Speed | .75"/sec. @ no load .4"/sec. @ 450 lbs. |
1.40"/sec. @ no load .8"/sec. @ 225 lbs. |
2.8"/sec. @ no load 1.6"/sec. @ 112 lbs. |
| End play | 0.036" max. less clevis |
0.036" max. less clevis |
0.046" max. less clevis |
| Restraining torque | Restrained internally | ||
| Input voltage | 12 or 24 VDC (115 VAC*) | ||
| Amperage (12 VDC) | 2.5 - 13 (50 amps @ stall) | ||
| End of stroke | Stall, optional limit switches | ||
| Thermal protecton | Internal motor breaker | ||
| Lead wires | 16 AWG PVC 800 | ||
| Connectors | Packard Electric 56 Series | ||
| Power Switch | Optional DPDT | ||
| Temperature | -30° to +180°F (-34° to 82°C) | ||
| Environment | IP-56 outdoor use | ||
| Duty cycle | 25% @ rated load and @ 70°F* | ||
| Anti-rotation | Tube can rotate max. of 7° | ||
| Options | |||
| Motor voltage | 12 or 24 VDC | ||
| Rotary pot | 10k, 10 turn | ||
| Rear clevis | M - 3 rotation (mountingrotated 90°) | ||
| Stroke length | 16" maximum (14" max with pot) | ||
| Limit switches | Adjustable extend and retract | ||
| Controls DF14 controls operate one or two Electrak 150 actuators. Available with one or two 24 VDC outputs with a handset to manually control bi-directional motion on each of the control outputs. Each actuator can be operated independently and sequentially but not simultaneously. It has quick disconnect sockets for the handset, cable adaptors for 5, 10, and 15 foot lengths to connect to each actuator. Click here to purchase controls |
|||